Residential & Commercial Roofing in Swansea
Everything we do is roofing. That focus means our Swansea crews install more roofs per year than companies that try to do siding, windows, and remodeling on the side.
Roof Replacement
After tear-off, we always check decking and replace what's needed. Soft spots mean moisture intrusion. The old roof was leaking longer than you realized. We use 7/16" or 15/32" CDX plywood depending on rafter spacing. New decking costs $75-$120 per sheet installed. We only replace what's actually damaged.
Get a Free Quote →
Roof Repair
Improper step flashing is the leading cause of roof leaks at wall-to-roof transitions. Step flashing needs to be woven between shingle courses with each piece extending 4" above the shingle exposure. We see Swansea homes where the last roofer used continuous L-flashing or just caulked the gap. That always fails. We tear it out and install proper step flashing with a kick-out diverter at the bottom per IRC R905.2.8.3.
Get a Free Quote →
Storm Damage Repair
Wind speeds above 60 mph cause shingle tab lift and adhesive seal failure per ASTM D7158 testing protocols. Our Swansea inspectors check the entire windward exposure. Not just the obvious damage. Poor ventilation causes ice dams which cause water intrusion under the shingle field during freeze-thaw cycles. We document all contributing factors so your insurance claim covers root-cause repairs, not just surface patches.
Get a Free Quote →
New Roof Installation
New construction means we get to do everything right from scratch. No compromises, no working around someone else's mistakes. Ice and water shield where it belongs, properly lapped underlayment, correct nailing patterns, and ventilation sized to the space. That's a roof that lasts.
Get a Free Quote →
Metal Roofing
We install 24-gauge and 26-gauge steel standing seam panels in Galvalume and pre-painted finishes. Concealed fastener clips allow the panels to expand and contract with temperature changes without stress on the fasteners. That's why standing seam doesn't leak. The clips float.
Get a Free Quote →
Shingle Roofing
CertainTeed Landmark PRO with NailTrak technology and Max Def color blends. Dimensional color depth that mimics natural cedar. Algae-resistant with StreakFighter technology. Class A fire rating, ASTM D3462 compliant, rated to 110 mph per ASTM D3161 Class F (Landmark PRO IR rated to 130 mph). 5-Star SureStart Plus warranty when installed by CertainTeed SELECT ShingleMaster. That's us. The warranty covers 100% of material and labor costs for 20 years with declining coverage for 30 more.
Get a Free Quote →
Flat Roofing
EPDM (rubber roofing) has a 50+ year track record as a flat roofing membrane. We install fully adhered EPDM with taped or glued seams over polyiso insulation. It's a great option for Swansea building owners who want proven performance at a lower cost than TPO or PVC.
Get a Free Quote →
Commercial Roofing
Your commercial roof has HVAC units, exhaust fans, plumbing vents, and satellite dishes punching through it. Every penetration is a potential leak point. We install prefabricated curbs, custom-welded flashings, and pitch pans that handle foot traffic and thermal cycling without failing.
Get a Free Quote →
Gutter Installation
We custom-form seamless aluminum gutters on-site from a continuous coil of .027 gauge stock. No factory seams means no seam failures. We form them to the exact length your fascia requires. One piece, one gutter, no leaks.
Get a Free Quote →
Roof Inspection
Annual inspections catch small problems early. A cracked pipe boot is a $150 repair. A year of water leaking through that crack causes $3,000+ in ceiling, insulation, and drywall damage. We recommend an inspection every 2-3 years for newer roofs, annually for roofs over 15 years.
Get a Free Quote →
Emergency Roof Repair
When a tree goes through your roof at 2 AM, you need someone who answers the phone and shows up with a truck full of materials. Call (877) 586-1316. We handle roofing emergencies in Swansea 7 days a week, including holidays.
Get a Free Quote →
Skylight Installation
Skylight installation includes cutting the roof opening, framing a curb with doubled 2x lumber, installing the unit with factory sealant, and weaving the step flashing into the surrounding shingle courses. Interior work includes drywall framing and trim. We handle the full job in Swansea. Outside and inside.
Get a Free Quote →